Printed inductors on alumina substrates

by: Har Dayal, Quang Le

Microwave Magazine, IEEE, Vol. 2, No. 2. (2001), pp. 78-86.

View FullText article

IEEE Explore

Reviews [Write a review of this article]

There are no reviews of this article

Find related articles from these CiteULike users

dcastro

Find related articles with these CiteULike tags

inductor, printed

Abstract

Fabrication of printed inductors on alumina substrate using circular and rectangular shapes of multiturn inductors were studied. The values of the inductors were found to be close to the design values. Inductors with 6 mil spacing were found to be closer to the design values than the 4 and 5 mil of spiral inductors. It may be because of the mutual inductor effect between the turns. Q values of the smaller inductor are comparable to the discrete values. Low-pass filters built using printed inductors between 100 and 400 MHz cut-off frequencies provided close to the simulated performances in which discrete component model were used

@article{citeulike:1814929, abstract = {Fabrication of printed inductors on alumina substrate using circular and rectangular shapes of multiturn inductors were studied. The values of the inductors were found to be close to the design values. Inductors with 6 mil spacing were found to be closer to the design values than the 4 and 5 mil of spiral inductors. It may be because of the mutual inductor effect between the turns. Q values of the smaller inductor are comparable to the discrete values. Low-pass filters built using printed inductors between 100 and 400 MHz cut-off frequencies provided close to the simulated performances in which discrete component model were used}, author = {Dayal, Har and Le, Quang }, booktitle = {Microwave Magazine, IEEE}, citeulike-article-id = {1814929}, journal = {Microwave Magazine, IEEE}, keywords = {inductor, printed}, number = {2}, pages = {78--86}, posted-at = {2007-10-24 11:17:24}, priority = {2}, title = {Printed inductors on alumina substrates}, url = {http://ieeexplore.ieee.org/xpls/abs\_all.jsp?arnumber=924921}, volume = {2}, year = {2001} }

RIS record

TY - JOUR ID - citeulike:1814929 L3 - citeulike-article-id:1814929 TI - Printed inductors on alumina substrates T2 - Microwave Magazine, IEEE JF - Microwave Magazine, IEEE VL - 2 IS - 2 SP - 78 EP - 86 N2 - Fabrication of printed inductors on alumina substrate using circular and rectangular shapes of multiturn inductors were studied. The values of the inductors were found to be close to the design values. Inductors with 6 mil spacing were found to be closer to the design values than the 4 and 5 mil of spiral inductors. It may be because of the mutual inductor effect between the turns. Q values of the smaller inductor are comparable to the discrete values. Low-pass filters built using printed inductors between 100 and 400 MHz cut-off frequencies provided close to the simulated performances in which discrete component model were used KW - inductor KW - printed AU - Dayal, Har AU - Le, Quang PY - 2001/// UR - http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=924921 ER -

RIS BibTeX