Active quasi-Yagi antenna direct conversion receiver array with digital beamforming

@inproceedings{citeulike:2762224, abstract = {A four-element array single card receiver for indoor wireless applications at C-band is presented. A broadband quasi-Yagi antenna is adopted as the antenna array element due to its broad beamwidth and low mutual coupling characteristics. The integrated receiver circuit uses a multilayer architecture, where RF and baseband circuits are placed above and below the antenna substrate, resulting in a very compact design. Using digital signal processing, the array element patterns are calculated from the four-channel amplitude and phase information of the baseband outputs. An initial test of the integrated receiver shows a scanning range of 70\°, without the use of any adaptive algorithm}, author = {Jeon, S. S. and Wang, Y. and Qian, Y. and Houshmand, B. and Itoh, T. }, booktitle = {Antennas and Propagation Society International Symposium, 2000. IEEE}, citeulike-article-id = {2762224}, doi = {10.1109/APS.2000.874434}, journal = {Antennas and Propagation Society International Symposium, 2000. IEEE}, keywords = {active, antenna, beamformer, digital, mixer, receiver}, pages = {1268--1271 vol.3}, posted-at = {2008-05-06 19:32:04}, priority = {2}, title = {Active quasi-Yagi antenna direct conversion receiver array with digital beamforming}, url = {http://dx.doi.org/10.1109/APS.2000.874434}, volume = {3}, year = {2000} }

TY - CONF ID - citeulike:2762224 L3 - citeulike-article-id:2762224 TI - Active quasi-Yagi antenna direct conversion receiver array with digital beamforming T2 - Antennas and Propagation Society International Symposium, 2000. IEEE JF - Antennas and Propagation Society International Symposium, 2000. IEEE VL - 3 SP - 1268 EP - 1271 vol.3 N2 - A four-element array single card receiver for indoor wireless applications at C-band is presented. A broadband quasi-Yagi antenna is adopted as the antenna array element due to its broad beamwidth and low mutual coupling characteristics. The integrated receiver circuit uses a multilayer architecture, where RF and baseband circuits are placed above and below the antenna substrate, resulting in a very compact design. Using digital signal processing, the array element patterns are calculated from the four-channel amplitude and phase information of the baseband outputs. An initial test of the integrated receiver shows a scanning range of 70°, without the use of any adaptive algorithm KW - active KW - antenna KW - beamformer KW - digital KW - mixer KW - receiver AU - Jeon, SS AU - Wang, Y AU - Qian, Y AU - Houshmand, B AU - Itoh, T PY - 2000/// UR - http://dx.doi.org/10.1109/APS.2000.874434 ER -