Mode switch in a two-element active array

@inproceedings{citeulike:2801465, abstract = {A theory based on the average potential method is presented to explain this phenomenon. The analysis of the stable modes shows that it is possible to control the mode by suitable design of the circuit. This active antenna array generates the sum pattern when the two units are connected by a metal strip. Instead of the chip resistor and the metal strip, appropriate devices may be used in the circuit to switch the modes and the radiation pattern can be changed electronically}, author = {Lin, J. and Itoh, T. and Nogi, S. }, booktitle = {Antennas and Propagation Society International Symposium, 1993. AP-S. Digest}, citeulike-article-id = {2801465}, doi = {10.1109/APS.1993.385259}, journal = {Antennas and Propagation Society International Symposium, 1993. AP-S. Digest}, keywords = {active, array}, pages = {664--667 vol.2}, posted-at = {2008-05-15 13:18:03}, priority = {2}, title = {Mode switch in a two-element active array}, url = {http://dx.doi.org/10.1109/APS.1993.385259}, year = {1993} }

TY - CONF ID - citeulike:2801465 L3 - citeulike-article-id:2801465 TI - Mode switch in a two-element active array T2 - Antennas and Propagation Society International Symposium, 1993. AP-S. Digest JF - Antennas and Propagation Society International Symposium, 1993. AP-S. Digest SP - 664 EP - 667 vol.2 N2 - A theory based on the average potential method is presented to explain this phenomenon. The analysis of the stable modes shows that it is possible to control the mode by suitable design of the circuit. This active antenna array generates the sum pattern when the two units are connected by a metal strip. Instead of the chip resistor and the metal strip, appropriate devices may be used in the circuit to switch the modes and the radiation pattern can be changed electronically KW - active KW - array AU - Lin, J AU - Itoh, T AU - Nogi, S PY - 1993/// UR - http://dx.doi.org/10.1109/APS.1993.385259 ER -